Electrostatic precipitator anode plate is essential accessories, is to trap charged dust, when the impact of the rapping, dust attached to the surface of the anode plate into a sheet or a slug from the board, falling into the lower part of the hopper, to ESP Dust purpose, as we explain below the basic requirements of the anode plate selection. Electric field strength at 1 anode plate surface is more evenly distributed, this can be viewed through the anode plate 2 instrumentation small deformation affected by temperature, and have sufficient strength, can beat the test by proof tool 3 between the discharge electrode less prone to shop flash network, you can try it on ESP, confirmed that no problem can be assured vibrator 4 anode plate board playing surface distribution is uniform acceleration 5 dry electrostatic precipitator rapping, easy to shake off dust; less secondary dust wet electrostatic precipitator anode plate 6 is easy to form a water light weight as possible, you can choose cheaper price. Precautions In practical applications, the anode plate situation is very simple, usually focused on the anode plate to ensure sufficient rigidity and reduce the anode plate secondary dust flying on it. Anode plate processing requirements must be strict to eliminate sharp edges burrs, to avoid spark discharge